Shop Forklift Barriers

Shop Forklift Barriers

High-Pressure Line and Electrical Protection


One of our shops needed custom floor plates and barriers for new equipment installation.  With heavy equipment traffic in this area, we needed to use some 3/4″ Steel Floorplate.  With exposed plumbing, it was necessary to build heavy plate protectors to avoid damage from passing forklifts or other heavy machinery.

Steel Floor Plates

3/4" Steel Floor Plate

Contact Blue Steel for more information on custom fabrication.


What is 10-1?

Thanks for passing!

Inrail Aluminum Crossover Bridge

Aluminum Crossover Bridge

Catalog# SH10150

Our Inrail Aluminum Crossover Bridge helps to eliminate slip-fall hazards and provides sure footing when traversing railroad tracks.

The Sturdy structural aluminum design sits on top of the foot of the steel rail and provides a stable surface for foot traffic.

Designed to remain in place when moving locomotives in and out of the work area.

Hand cutouts for easy removal, and track cleaning.

Aluminum Safety Grip Grating, for walking and working surfaces where mud, ice, snow, grease, and oil can create a slip/fall hazard.

Removable posts and chains are to alert workers about a Blue Flag Protection condition.  Federal Regulation 49 CFR 218.37

For more information Click Here.

Aluminum In rail crossover bridge for railyards
In rail crossover bridge for the safe transition over in rails.



Inrail Aluminum Crossover Bridge

For more information email

What is 7+4?

Thanks for passing!



Pegboard Tool Management

Pegboard Tool Management

Finally, The Heavy Duty pegboard tool hanger you need has been built.

All of our pegboard hangers attach to the board with a steel tab and set screw, and do not fall off when retrieving your tools.

Heavy Duty Custom pegboard socket holders.


This is not the pressboard they sell at the homeowner hardware store or cheap stuff you can buy online that arrives dented.  This is 12 Ga. Galvanized tool board that you will buy once and be done.

Blue Steel has produced custom tool hangers you need to manage your collection of BIG HEAVY TOOLS on your pegboard and for our 5S Tool Cabinets.

Pegboard Tool Management from Blue Steel Co., Inc.

We have designed and manufactured these to stand up to the toughest conditions.

Stay tuned for part numbers, Available NOW.

3/8" Drive Pegboard socket holders

3/8″ Drive Pegboard socket holders

Socket holders

Pegboard Hangers
Pegboard Tool Holder
Socket Holders
Steel Pegboard Holders
Round Pegboard Socket Holders
Socket Wrench Holder


Pegboard Cylinder Hangers


Call Blue Steel to order Pegboard tool holders



[contact-form][contact-field label=”Name” type=”name” required=”1″ /][contact-field label=”Email” type=”email” required=”1″ /][contact-field label=”Website” type=”url” /][contact-field label=”Comment” type=”textarea” required=”1″ /][/contact-form]

Hydraulic Aluminum Crossover Bridge

Installation of a crossover bridge

A Crossover Bridge will be a huge timesaver in your shop. With a push of a button, your workers can safely move across shop locations and not waste that time or risking injury walking up and down ramps and stairs.

This installation shows how the bridge we installed 10 years earlier was salvaged from a location that was shut down and modified for its new home.

The Original Bridge Installation was about 1999- Photo shows taken 2003
The pump was mounted under the concrete ramp.
After we refurbished the hydraulics and pins and a new paint job
We had to design an anchor stand for the bridge since this metal grating deck was not suitable for mounting the bridge

What is 9-3?

Thanks for passing!
The stand also served as our pump mounting location under the bridge.



Cooling System Test Kit 5S Tool management

Cooling System Test Kit Tool Dolly

Cooling System Test Kit for GE and EMD Engines

Blue Steel Catalog# SH10040

This kit has several components that are all located on one dolly and include a place for all the different models of Neck Fill Pressure Fixtures.  We have now included the hose holders to help keep the newer stiff hoses from unwrapping on the cart.  Call us 800-377-2109

GE and EMD Cooling System Test Kit Tool Dolly
Locate and wheel all your tools needed to test cooling system pressure.

GE and EMD Cooling System Test Kit Tool Dolly
Blue Steel Railroad Industry Standard Tools and Equipment.

Hose Keepers for Dolly or tool board

[contact-form][contact-field label=”Name” type=”name” required=”1″ /][contact-field label=”Email” type=”email” required=”1″ /][contact-field label=”Website” type=”url” /][contact-field label=”Comment” type=”textarea” required=”1″ /][/contact-form]

Truck Upfit for the Road Crew-Keeping Safe

Road Crew Truck Upfit

This crew hits the road in the rain, wind or snow, they deserve the same work safe environment as the shop crew does.

We were tasked with securing all the required tools for the job. We designed a special slide for the derailer since it is so heavy and required a reach and lift with your back extended.  Is this OSHA number one back strain position?  It may be, but now the slide mechanism pulls it out so it is a straight arm lift position.  Next came securing brake shoes,  Derail Locks, MU hoses, buggy bars, and brooms.

The first truck we did was old but we completely emptied and cleaned out the bed for layout.


Almost as nice as when it was new just a little more character.

Locomotive Truck Coil Spring Alignment Tool

Locomotive Coil Spring Alignment Tool

Aligning the coil spring and keeping your hands out of the danger zone.

Blue SteelCo Part Number SHTL 10045

Lightweight Aluminum Construction with Rubber Grip



For more information call 800-377-2109  Email

[contact-form][contact-field label=”Name” type=”name” required=”1″ /][contact-field label=”Email” type=”email” required=”1″ /][contact-field label=”Website” type=”url” /][contact-field label=”Comment” type=”textarea” required=”1″ /][/contact-form]


Locomotive TRS SRS Sensor Gauges

TRS SRS Sensor Gauges

TRS SRS Feeler Gauges  .040-.070-.080

Precision Ground to +/-.001 Tolerance.

Catalog# SH10161M – $CALL /set as shown with pouch.

Color-coded and slight bend make these gauges easy to use in the confined spaces of the car body. A precision Ground aerospace-grade aluminum with sensor application engraved into the gauge.

EMD Diesel Engines for use in Railpower, Marine, Industrial.

For more info go to this page TRS/SRS Sensor

Pre-order today for new stock we are manufacturing now!!

CALL 800-377-2109 email

What is 10-1?

Thanks for passing!


TRS/SRS Feeler Gauges set for EMD Diesel Engines

In-House Safety Blue Flags

In-House Safety Blue Flags

New safety flag design with durable 40″ square tube aluminum staff and 4″ x 15″ STOP  (30″Overall)


Osha and FRA required flags state you need a consistent message. So we offer a variety of common safety call outs for Railroad Safety Signs.

Reflective Prismatic Signs with 2 powerful magnets that are molded in rubber to help prevent magnets from breaking. Magnets have 2″ standoffs so the staff will not hit the cab window sill area.


For more information and availability please contact Blue Steel

Call 800-377-2109 email:

[contact-form][contact-field label=”Name” type=”name” required=”1″ /][contact-field label=”Email” type=”email” required=”1″ /][contact-field label=”Website” type=”url” /][contact-field label=”Comment” type=”textarea” required=”1″ /][/contact-form]